How to choose an LED outdoor patio light?

Currently, the city lighting is getting better and better. Especially the fashionable and beautiful LED outdoor patio light has long replaced the traditional lamps. Especially in some high-end communities and civic squares it has become a beautiful landscape.

• What are the installation steps for the LED outdoor patio light?

• How to choose an LED outdoor patio light?

• What are the requirements of LED patio light as landscape lighting?

What are the installation steps for the LED outdoor patio light?

Installation steps:

When installing the LED outdoor patio light, open the packaging, check the integrity of the LED outdoor patio light and read the product manual for assembly and wiring. The general steps are: open the lamp housing, install the light source and supporting electrical appliances (see electrical equipment manual for electrical wiring), lead the connection cable out of the threaded hole to the bottom of the light pole, and then connect it to light head to the light pole, make sure tighten the mounting screws, and then align the flange of the LED outdoor patio light with the screw of the embedded part of the foundation and stand vertically. The fastening nut can then be tightened with a nut or washer after leveling.

LED outdoor terrace light circuit cabling:

After installing the LED outdoor patio light, you can refer to the instructions and electrical specifications for the wiring work. It should be noted that the installation wiring must be grounded. In general, the garden light reserves a grounding connection for grounding to avoid potential safety risks.

How to choose an LED outdoor patio light?

general principles

(1) Select the ratio of light with appropriate light distribution. The light distribution method of the luminaire should be determined according to the function and spatial shape of the lighting location.

(2) Select efficient patio lighting. Provided that the requirements for the glare limit are complied with, direct-emitting lamps and open lamps should be used for lighting that fulfils only the visual function.

(3) Choose the patio light which is easy to install and maintain and has low operating cost.

(4) In special places with a risk of fire or explosion and environments such as dust, moisture, vibration and corrosion, the patio light should be selected that meets the requirements of the environment.

What are the requirements of LED patio light as landscape lighting?

(1) Provided that the glare limit and light distribution requirements are complied with, the efficiency of flood lighting should not be less than 60.

(2) The protection level of outdoor landscape lighting should not be lower than IP55, the protection level of underground lamps should not be lower than IP67, and the protection level of lamps used in water should not be lower than IP68.

(3) For contour lighting, LED lamps or lamps with fluorescent lamps on one side should be used as a light source.

(4) LED lamps or lamps with small diameter fluorescent lamps as a light source should be used for internal light transmission lighting.

Minleon Outdoor Lighting is committed to providing its customers with reliable outdoor LED patio lights and perfect after-sales service so that customers can easily invest, use them confidently and not worry.