What are the main advantages of outdoor patio lights?

Outdoor patio lights are lighting fixtures for courtyards, that is, a type of outdoor lighting fixtures. Usually, it refers to the lighting fixtures in outdoor roads below 6 meters, and its main components include five parts: light source, light pole, lamps, flanges, and foundation embedded parts.

• What are the main advantages of outdoor patio lights?

• What are the main components of outdoor patio lights?

• How to install outdoor patio lights?

What are the main advantages of outdoor patio lights?

From the most obvious advantage of led outdoor lights patio furniture, its service life is longer. It is very complicated to know that a lamp is damaged and needs to be replaced. The latest scientific research result of LED light source is that the service life of LED light source is three times that of traditional light source, which shows that the service life of LED garden light is super long. In addition, led outdoor patio lights are more energy-saving and environmentally friendly. This advantage has a wide range of influence in the market, and the country has always vigorously advocated the use of energy-saving and environmentally friendly lighting facilities, and outdoor patio lights are more cost-effective for electricity, compared to ordinary street lights. Power can be saved.

What are the main components of outdoor patio lights?

1. Lamps: LED lighting systems are installed in the lamps. Cut the wire to make the wire, take 1mm red and black copper core multi-strand wire, cut six sections of 40mm each, strip 5mm at both ends, and dip them in tin. To make the lead of the lamp board, take a 1mm two-core wire, cut a section of 700mm, peel the inner skin of 60mm, strip the brown wire of 5mm, and dip it in tin; strip the blue wire of 5mm, and dip it in tin as well. . The outer end is peeled for 80 mm, the brown wire is peeled off by 20 mm; the blue wire is peeled off by 20 mm.

2. Light poles: Light poles mainly include: equal-diameter steel pipes, heterosexual steel pipes, equal-diameter aluminum pipes, cast aluminum light poles, aluminum alloy light poles, etc.

3. Flange plate and foundation embedded parts: flange plate is an important component for LED garden light pole and ground installation.

How to install outdoor patio lights?

Installation method: Before installing LED outdoor patio lights, it is necessary to use M16 or M20 (common specification) screws to weld into a foundation cage according to the standard flange size provided by the manufacturer, and then at the installation site, dig a hole of suitable size by traveling to put the foundation. The cage is placed in it. After the level is corrected, cement concrete is poured to fix the foundation cage. After three to seven days, the cement concrete is fully solidified, and the led outdoor patio lights can be installed.

The widespread use of outdoor patio lights has continuously increased the demand for them in the market. Minleon Outdoor Lighting, as a Chinese pioneer in LED lights, can ensure the  quality and after-sales service.